Page cover

ARK RIG7

The ARK RIG5 is a 7 inch development drone compatible with a large suite of ARK electronics hardware. Specifically designed for compatibility with the ARK Jetson PAB carrier.

Build Guide

N/A

Part List

Part
Quantity
Component

Frame (top/bottom)

1

N/A

M3x45 Standoff

8

Frame

M3x8 Screw

32

Frame/ESC/FPV FC/Jetson PAB carrier

M3x16 Screw

20

Ark Flow/Landing Gear/Prop Guards

M3 Locknut

20

Ark Flow/Landing Gear/Prop Guards

M2x16 Screw

4

GPS

M2 Locknut

4

GPS

M3x10 Male-Female standoff

4

Connecting FPV-ESC

M3x10 Female-Female standoff

4

Connecting ESC-Frame

M2.5x10 Female-Female Standoff

4

Connecting PAB

M2.5x8 Screw

8

Connecting PAB

Compatibility

Printed Parts

All printed parts are available on GitHub. They will be available as STEP files so that you can make any changes you want! The files will include:

  • Landing gear

  • Prop guards

  • Motor spacer

  • Flow spacers

The frame will also be included so that you can modify it or just make it yourself if you have access to a CNC machine

3D models can be found here: https://github.com/ARK-Electronics/ARK_RIG5

Compatibility

Part List

Flight controller options:

ESC options:

GPS options:

Optical flow sensor options:

Addition components beyond ARK ecosystem:

  • 4 motors

  • RC setup, we recommend ExpressLRS

  • Battery

  • Wifi module in case you are not using an ARK Jetson PAB or Pi based FC DroneBridge - https://drone-bridge.com/

Weight

Frame
Full drone (no battery)
Full drone (with battery)

N/A

N/A

N/A

Build Guide overview and timestamps

N/A

N/A

Last updated