ARK Documentation
  • ARK Electronics Docs
  • Flight Controllers
    • ARK FPV
      • Pinout
      • 3D Models
    • ARKV6X
      • PX4 Instructions
      • ArduPilot Instructions
      • 3D Models
    • ARK Pixhawk Autopilot Bus Carrier
      • 3D Models and Case Files
      • Pinout
      • PX4 Instructions
    • ARK Jetson PAB Carrier
      • Block Diagram
      • Pinout
      • 3D Models and Case Files
      • Flashing Guide
      • ARK Software
        • Services
      • Autopilot Connections
      • Updating the Flight Controller Firmware
      • Micro USB Console
      • Mini DisplayPort
    • ARK Pi6X Flow
      • Block Diagram
      • Pinout
      • 3D Models
      • Flashing Guide
        • Pi CM4 Lite with Micro SD
        • Pi CM4 with EMMC
        • After Flashing, Before Installing
        • Wi-Fi Setup
        • SSH
      • ARK Software
        • Services
      • Autopilot Connections
      • Updating the Flight Controller Firmware
    • ARK VOXL2 RTK PAB Carrier
      • Pinout
      • Connectors and Cables
      • 3D Models
      • Autopilot Connections
  • Electronic Speed Controllers
    • ARK 4IN1 ESC
      • Pinout
      • Firmware
      • 3D Models
  • Radio
    • ARK M.2 LTE
      • OpenVPN
  • Sensors
    • ARK Flow
      • PX4 Instructions
      • ArduPilot Instructions
      • 3D models & Case files
    • ARK RTK GPS
    • ARK TESEO GPS
    • ARK MOSAIC-X5 RTK GPS
    • ARK GPS
      • PX4 Instuctions
      • 3D models
    • ARK CANnode
      • PX4 Instructions
      • 3D Models
    • ARK RTK Base
      • 3D Model
    • ARK ADIS16507
      • PX4 Instructions
      • ArduPilot Instructions
      • 3D Model
    • ARK SCH16T
      • PX4 Instructions
      • ArduPilot Instructions
      • 3D Model
  • Power
    • ARK PAB Power Module
      • PX4 Instructions
      • ArduPilot Instructions
      • 3D Model
    • ARK 12S PAB Power Module
      • PX4 Instructions
      • ArduPilot Instructions
      • 3D Model
  • ROS2 & PX4
    • Mastering Precision Landing with PX4 & ROS2
    • Aruco Detectios Tutorial
    • Custom Modes Hardware Demo with PX4 & ROS2
    • Utilizing Custom Modes in PX4 with ROS2 and QGC
    • Simulated Offboard Mode
  • Resources
    • Links
    • About
Powered by GitBook
On this page
  1. Power

ARK PAB Power Module

Previous3D ModelNextPX4 Instructions

Last updated 5 days ago

The ARK PAB Power Module is rated for 60A continuous battery current at 20C ambient. However, when running 60A battery current at 20C without cooling, the 5V regulator is de-rated to 3A continuous output. It is recommended to run multiple power modules in parallel if more than 60A continuous current is required.

PX4 Instructions
ArduPilot Instructions
3D Model
Page cover image